Here’s some painting tips: To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
The secret of a good paint job is that most of the hard work is done before a brush ever hits the building. Painting a poorly prepped surface will only result in disappointment, while quality pre-paint work pays huge dividends. So armed with the knowledge that preparation is king when it comes to painting, here are 10 tips to help your exterior paint prep projects go faster, look better and cost less. Thornton House Painting
Before diving into full exterior paint prep mode, put a test swatch of paint on the surface. And check our tips on selecting the best outdoor paint. Check to make sure that it matches the color you picked out. There's nothing worse than getting halfway across a house before realizing you have the wrong shade of green or that you've been painting the wall in a flat instead of a semi-gloss. At this point all the hardest work is done and you'll soon be able to relax and enjoy the finished product. Check out these hacks for your next painting project.

Once you have the approximate square footage that you’ll need to paint, remember that a gallon of paint generally covers between 250 and 400 square feet. You’ll need more if you’re painting a rough, porous material, or if you want to paint a dark house a much lighter color. Depending on your color choice, you may need a more expensive tinted primer to help with the color transition. Thornton House Painters
×