What's in a house painting contract is an important question that comes up as you get deeper into your remodeling venture. Between the time you decide your house needs a new coat of paint and the time the job gets done, a lot transpires. After you've decided on an interior painter or exterior painting contractor, you should have them write a formal contract, and this is what it should include:
Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.
The rule of thumb has always been to apply a good coat of primer, sand, then apply your color coats. This is still a good rule to follow, but new paint technologies have combined primer and paint into one product, which manufacturers assert will cut down on the number of coats you will have to apply. This newer paint is more expensive, but may be comparable to the purchase of separate primer and paint. Look at reviews of these newer paints, particular from folks that have used it in your area.
Whether you decide to do the preparation work yourself or have a professional do it as part of your project, proper preparation makes all the difference in creating a smooth and lasting finish. Do it correctly the first time or you’ll quickly end up spending more to fix peeling and chipping paint. Follow this process before starting on your home's exterior. Keep in mind that the process may vary based on your siding materials: Thornton Home Painting
Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.

Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust. Thornton House Painters
Once you have the approximate square footage that you’ll need to paint, remember that a gallon of paint generally covers between 250 and 400 square feet. You’ll need more if you’re painting a rough, porous material, or if you want to paint a dark house a much lighter color. Depending on your color choice, you may need a more expensive tinted primer to help with the color transition. Thornton House Painters
×